O11D EVO Distro Plate G2
- Distribution plate made for O11 Dynamic EVO/ O11 Dynamic/ O11 Dynamic XL
- Designed by EKWB
- Multiple inlet and outlet ports
- Provide an adaptable solution for single GPU, dual GPU,verticla GPU, single rad or dual rad configuration.
- ARGB Strips in the front
- Built-in DDC 4.2 pump
O11D EVO Distro Plate G2 is a custom water cooling reservoir, routing and pump solution designed by EKWB. This “distro plate” is the successor to the very successful G1 version and is specifically designed to provide an advanced water cooling solution for the incredibly popular O11D chassis series, namely:
• Lian Li O11D
• Lian Li O11D XL
• Lian Li O11D EVO
It is an all-in-one solution that includes a pump and a reservoir while acting as a coolant routing system. To avoid any confusion that this distro plate is only for novice-level users, seasoned PC builders will also appreciate the engineering that went into the G2. This minimizes the number of bends needed to create a perfect loop, or completely removes the tube bending process from the equation if using pre-bent 90° tubes.
The G2 is exceptionally versatile and can support a wide variety of hardware and radiator options. For a standard setup with a horizontally mounted GPU with an ATX motherboard, all O11D, O11DXL and O11D EVO supports dual radiators on the top and bottom with G2.
The distro plate comes with a powerful, market-proven, PWM-controlled 4.2 DDC pump made in Europe! The pump can draw a maximum of 18W and is powered via a black flat cable with a SATA connection. The goal was to create a product with enough power to give outstanding performance with multiple blocks and radiators.
For those who do not wish to use a DDC pump, this distribution plate can also mount D5 pumps. The O11D, O11D EVO, and O11D XL cases have enough depth to allow fitment of the D5 pump.
It is mounted on the side of the case, revealing the beautiful aesthetics through the side window. The built-in addressable LED strip connects to the motherboard 5V header and is compatible L-Connect RGB control software and motherboard software such as, MSI’s Mystic Light Sync, ASRock’s Polychrome Sync, ASUS’ Aura Sync, and GIGABYTE’s RGB FUSION.
SPECIFICATIONS
| MODEL | O11D EVO Distro Plate G2 |
|---|---|
| RESERVOIR | |
| DIMENSIONS WITH THE ATTACHED PUMP | 312 x 50.9 x 142mm(W x D x H) |
| D-RGB CABLE LENGTH | 800mm |
| D-RGB CONNECTOR | standard 3-pin (+5V, Data, Blocked, Ground) |
| PUMP MOTOR TECHNICAL SPECIFICATIONS | |
| Dimensions | 90 x 62 x 38mm (W x D x H) |
| Motor | Electronically commuted ball bearing motor |
| Rated voltage | 12V DC |
| Power consumption | 20W |
| Maximum pressure head | 5.2m |
| Maximum flow | 1000L/h |
| Maximum system temperature | 60°C |
| Materials | Stainless steel, PPS-GF40, EPDM O-rings, Aluminum oxide, hard coal |
| Power connector | SATA and 4-pin PWM FAN connector |