• _DSC4843
  • _DSC4836
  • _DSC4480
  • _DSC4479
  • sl120v2_a06
  • _DSC4482
  • sl120v2_b06
  • _DSC4483
  • _DSC4628
  • _DSC4625
  • e005
  • e006

UNI FAN SL V2

  • Improved daisy chain design to connect 2 clusters of fans.
  • SL120 V2 fan frame thickness is 28mm to provide 10% improved airflow compared to V1.
  • Removable interlocking keys to provide better radiator clearance.
  • Start/stop fan RPM support for a quieter environment.
  • Smoother side lighting for a better aesthetic.
  • Only one cable is required for each fan cluster when using the provided new UNI HUB to control lighting effects via L-Connect 3.
Slide In Daisy-Chain Style
Improved Performance
Sophisticate Lighting Effects
Cableless with Controller
Start/ Stop Fan
L-Connect 3 Software

AVAILABLE IN TWO SIZES AND TWO COLORS

White / Black

SL120 V2

Black / White

SL140 V2

UPGRADED MODULARITY

UNI FAN SL V2 revised its interlocking style to connect up to 6 fans in two clusters to a single controller port, making cable management simpler.

Extension Cable

With the new 18 cm extension cable, the ability to bridge two clusters of fans to create a 3+3 daisy-chained cluster is offered. These 6 fans can then be connected to a single port on the SL V2 UNI HUB controller. The new daisy-chaining solution reduces the number of cables needing to be managed at the back of the case and enables new lighting effects which can be continuous between the two bridged clusters.

Note:
Each port can support up to 6 fans while the maximum number of fans supported by the controller is 16.

Plug-in Power Cable Module

The cable module is designed to plug in and sit flush with the fan frame, which doesn’t require extra space for the module and reduces clearance issues with radiator fittings.

UNI FAN SL120 V2

UNI FAN SL120 V1

Removable Key

The interlocking keys on each fan are removable to improve compatibility with radiator fittings.

IMPROVED PERFORMANCE

Thanks to a slight increase to a 28mm thick frame, the SL120 V2 features a 10% airflow optimization compared to the SL120 V1, which creates a great balance of airflow and static pressure.

AIRFLOW

64.5 CFM

STATIC PRESSURE

2.59 mmH2O

NOISE

29.2 dBA

SPEED

0, 250-2000 RPM

1.

Thicker Impeller
Increased thickness to 28mm for better efficiency

2.

Magnetic Frame
To provide extra support for fan blades

3.

Magnetic Rubber Ring
To ensure extreme stability

4.

Fluid Dynamic Bearing (FDB)
To effectively reduce the internal friction for improved durability

5.

Circlip
To secure the fan blades in place

6.

Stator
To provide a rotating magnetic field that generates momentum

7.

Extra Magnetic Force
To support the fan blades and reduce vibration levels, thus ensuring a low noise level while in operation

8.

Rubber Pads
To reduce vibrations and ensure extremely low noise levels

MORE SLEEK LIGHTING DESIGN

Detail Oriented

The cut edge of the rubber pads is designed to create a smoother curve along the light diffuser.

Continuous LED Channel

The light gap between the two fans when interlocked together has been reduced from 5.6mm to 3mm, sketching out the elegant lighting effects.

Dazzling at All Angles

The center of the rear fan has been decorated with an aluminum medallion for an aesthetic look in any orientation.

More Lighting Effect Choices

New lighting effects have been developed for the updated version of the SL fans, offering more lighting options: Render, Tunnel, Voice, and Groove.

Merging Lighting Effects

A merge function is available to allow lighting effects to flow not only across a single cluster but across the whole system.

SIMPLE CONNECTION WITH CONTROLLER

The all-new cable module and UNI HUB controller simplifies cable management and provides efficient power to the fans.

16 Fans in One Go

The included controller in the triple pack can support up to 16 fans and 2 SM-type connected devices.

1.

SM Type Port
Compatible with the Galahad AIO pump ARGB cable…etc. Each port supports a 5W maximum output.

SYNC 4 port syncs to the lighting effect of port 4 and SYNC 2 port syncs to the lighting effect of port 2

2.

Fan Group ARGB + PWM Signal
Supports clusters of up to 6 fans

3.

2×SATA Cable
Total maximum input of 29W


Main- SATA: Plug in all circumstances
Sub-SATA: Plug when connecting more than 12 fans or often set to white static color.

4.

USB Cable
Plug to motherboard 9 pin USB header

5.

5V ARGB / 4 PIN PWM Cable
Required for motherboard sync function.

Note:
Please lower the brightness of static white when connecting more than 9 SL V2 fans synchronized to the motherboard. Failing to do so may cause inaccurate colors.

Only One Cable

Combining both the power cable and the lighting cable into a single one, the cable module uses a 7-pin connector to connect to the controller, efficiently reducing the number of cables cluttering the PC build.

Direct To Motherboard

The single pack includes a cable module that features a 4-PIN PWM and a 3-PIN SM-type ARGB cable (3P to 3P 5V ARGB cable is included) to connect directly to the motherboard.

INDENTED SCREW HOLES

Implementing Indented screw holes to fit standard 25mm screws for mounting with the radiator.

When using gasket or mounting the fan directly to the case with the radiator underneath, suggesting use #6-32 X 1-1/2 inch screws.

Support 25mm screw

L-CONNECT 3 SOFTWARE TO CONTROL SL-V2 FANS

Control and preview with precision the lighting effect of the SL-V2 fans with the new L-Connect interface.

1.

Select lighting effects or set as merge mode

2.

Set personalized color / brightness / speed / direction

INTELLIGENT START/ STOP FAN

1.

L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature.

2.

The fan curve diagram displays a real-time RPM curve to configure the desired fan curve profile more intuitively.

DEFINE THE ORDER

You can now name, set the quantity, and re-order the fans clusters on the Settings > Device page.

PACKAGE CONTENT

SL120V2 Triple Pack Black

SL120V2 Triple Pack White

SL120V2 Single Pack Black

SL120V2 Single Pack White

SL140V2 Single Pack Black

SL140V2 Single Pack White

SPECIFICATIONS

 MODEL NAMEUNI FAN SL V2 120UNI FAN SL V2 140
MODEL NO.UF-SL120V2-3B BLACKUF-SL120V2-3W WHITEUF-SL120V2-1B BLACKUF-SL120V2-1W WHITEUF-SL140V2-1B BLACKUF-SL140V2-1W WHITE
COLORBlackWhiteBlackWhiteBlackWhite
NUMBER OF FANS331111
CONTROLLERYesNoNo
CONNECTOR TYPE4 × 7-PIN
(Power Cable)
2 × Extension Cable
1 × 4-PIN PWM
+ 3-PIN SM Type
1 × ARGB MB Adaptor
1 × 4-PIN PWM
+ 3-PIN SM Type
1 × ARGB MB Adaptor
MATERIALPBT/PC/Aluminum)
RATED VOLTAGEDC 12V (FAN) & 5V (LED)
FAN DIMENSION120 X 120 X 28 (mm)140 X 140 X 25 (mm)
FAN SPEED0, 250~2000 RPM0, 250~1600 RPM
MAX. AIR PRESSURE2.59 mmH2O (Maximum)2.09 mmH2O (Maximum)
MAX. AIRFLOW64.5 CFM (Maximum)77.6 CFM (Maximum)
ACOUSTIC NOISE29.2 dB(A) Max29 dB(A) Max
LOCKED CURRENT0(Automatic Protection)
BEARING TYPEFluid Dynamic Bearing (FDB)
OPERATE VOLTAGEDC12V & 5V
START-UP VOLTAGE≦5V
INPUT CURRENT0.17A0.11A
INPUT POWER2.04W1.32W
WARRANTY2 years

MODEL