• LC2-black-02
  • LC2-whitw 02
  • LC2-black-side45
  • LC2-white-side45
  • lancool-ii-black-front
  • lancool-ii-white-front
  • lancool-ii-black-side
  • lancool-ii-white-side
  • lancool-ii-black-leftSide
  • lancool-ii-white-leftSide
  • lancool-ii-black-rightSide-open
  • lancool-ii-white-rightSide-open
  • lancool-ii-black-rightSide
  • lancool-ii-white-rightSide
  • lancool-ii-black-IO
  • lancool-ii-white-IO
  • lancool-ii-black-top
  • lancool-ii-black-build-side
  • lancool-ii-white-build-side

LANCOOL II

Best PC&Gaming Cases for PC Builder and Gamer. LANCOOL II is the easiest to open the Tempered glass side panels, offer an unobstructed view to the internal components. The Bottom flip shroud panels provide a quick and easy access to PSU/HDD installation.Powerful multifunctional well-crafted.The ultimate chassis for beginners and enthusuasts alike.Exquisite steel craftsmanship.Flip panels and shrouds all around.

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

STRONG AND DURABLE CONSTRUCTION

OPTIMIZED COOLING SUPPORT

QUICK AND EASY CABLE MANAGEMENT

FLIP PANELS AND SHROUDS ALL AROUND

TOOL-LESS RGB FRONT PANEL

EASY ACCESS TO HARD DRIVE INSTALLATION

EXQUISITE STEEL CRAFTSMANSHIP

35MM WIDE FRONT MESH FOR OPTIMIZED AIRFLOW

FLIP PANELS AND SHROUDS ALL AROUND

TEMPERED GLASS SIDE PANELS OFFER AN UNOBSTRUCTED VIEW TO THE INTERNAL COMPONENTS

THE BOTTOM FLIP SHROUD PANELS PROVIDE A QUICK AND EASY ACCESS TO PSU/HDD INSTALLATION

NO VISIBLE SCREWS AND MaGNeTIC TEMPERED GLASS SIDE PANEL

HINGE DESIGN FOR FAST ASSEMBLY

ADDITIONAL TWO SSD TRAYS ON THE INWARD OF THE FLIP SHROUD PANELS

CABLE MANAGEMENT AT EASE

THE COVER PLATES SAVE THE USERS’ NECK AND FINGERS BY HIDING NEARLY ALL CABLES WHILE OFFERING AN EASY ACCESS FOR CABLE MANAGEMENT

1. SIDE INSTALLATIONLEFT RECTANGULAR COVER PLATE
TO CONCEAL MOST OF THE CABLES CONNECTING THE PSU AND I/O PORTS

2.TOP RIGHT SQUARE COVER PLATE
TO COVER ALL THE WAYWARD FAN CABLES
UNDERNEATH IS A MOUNTING PLATE FOR A REMOVABLE FAN/LED HUB

3.BOTTOM SHROUD PANELS TO COVER THE PSU CABLES
THE FLIP SHROUD PANELS CONCEAL ALL THE POWER SUPPLY CABLES IN THE BOTTOM CHAMBER

TOOL-LESS SLIDING HARD DRIVE CAGE

SLIDE THE HARD DRIVE BAY ALONG ITS BOTTOM TRACK TO THE POSITION THAT BEST FITS YOUR INTERIOR CONFIGURATION

FLEXIBILITY TO ACCOMMODATE A LONG PSU

CLEARANCE FOR PSU CABLES

ROOM FOR MASSIVE RESERVOIRS

REMOVABLE SSD MOUNTING BRACKETS FOR 2 X 2.5" SSD

TWO 2.5″ SSD CAN BE MOUNTED BEHIND THE MOTHERBOARD TRAY AND BE DISPLAYED THROUGH THE TEMPERED GLASS PANEL

AT THE INWARD OF THE RIGHT-SIDE BOTTOM SHROUD PANEL FOR ADDITIONAL 2 X 2.5″ SSD

REMOVABLE SSD MOUNTING BRACKETS FOR 2 X 2.5" SSD

FLIPPABLE, FLEXIBLE, MULTIFUNCTIONAL

ATX MODE
ENSURES THE MOTHERBOARD CABLES ARE CONCEALED DISCREETLY BEHIND THE MOTHERBOARD TRAY

E-ATX MODE
THIS MODE ALLOWS THE BUILDERS TO PERFECTLY FIT AN E-ATX MOTHERBOARD WHILE COVERING THE CABLES AT THE SAME TIME TO SAVE THE EFFORT FOR CABLE MANAGEMENT

MULTI-WAY FAN/RADIATOR BRACKET

THE MULTI-WAY FAN/RADIATOR BRACKET REVOLUTIONIZES YOUR NOTION OF FAN/RADIATOR INSTALLATION BY OFFRING 4 INSTALLATION OPTIONS TO BEST CATER TO YOUR INTERIOR CONFIGURATION

110MM SCENARIO
CLOSER TO THE FRONT PANEL FOR THICK RADIATOR

55MM SCENARIO
CLOSER TO THE MOTHERBOARD FOR MORE DIRECT COOLING

ATTENTION!
DO NOT INSTALL A 140/280MM RADIATOR IN THE INNER SIDE OF THE MULTI-WAY FAN/RADIATOR BRACKET OTHERWISE UNREPAIRABLE DEFORMATION WILL OCCUR. YET IT’S OK TO MOUNT THE FANS IN THE INNER SIDE AND THEN MOUNT THE RADIATOR ON THE FANS.

OPTIMIZED COOLING SUPPORT

FRONT VENTILATION AND INDENTATION
35MM WIDE FRONT MESH FOR OPTIMIZED AIRFLOW

TWO INSTALLATION OPTIONS FOR TOP FAN/RADIATOR INSTALLATION
2 X 120/140MM FANS CAN BE MOUNTED MIDWAY ATOP OR ALIGNED TO THE LEFT TO AVOID INTERFERENCE WITH THE MEMORiES WHILE BEING COMBINED WITH A 240MM RADIATOR

DESIGNATED VENTILATION FOR GPU
THE VENTILATED BOTTOM SHROUD PANAL PROVIDES PROVIDE EXTRA AIRFLOW TO KEEP GPU COOL

LANCOOL II-1X (OPTIONAL)

NO COMPROMISE ON EITHER AESTHETICS OR RELIABILITY
THE VERTICAL GPU HOLDER EXCLUSIVE FOR LANCOOL II ALLOWS BUILDERS TO VERTICALLY MOUNT THE GRAPHICS CARD WHILE STILL PROVIDES ROOM TO MOUNT 2 X 120MM FANS UNDERNEATH THE GPU

GB-001 (OPTIONAL)

THE ANTI-SAG GRAPHICS CARD BRACKET PROVIDES EXTRA SUPPORT FOR GRAPHICS CARDS

Note:
In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.

1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)


4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.

TOOL-LESS RGB FRONT PANEL

BUILT WITH A QUICK CONNECT ADAPTOR, THE FRONT PANEL CAN BE EASILY REMOVED OR MOUNTED BACK TO IMMEDIATELY DISCONNECT OR LIGHT UP THE FRONT RGB

SWITCH THE RGB AT EASE

THE LIGHTING CAN BE CONTROLLED THROUGH THE C AND M BUTTONS ON THE TOP FRONT. 8 LIGHTING MODES IN TOTAL, THE 8TH MODE ALLOWS THE LIGHTING TO BE SYNCED WITH THE MOTHERBOARD

ATTENTION!
MAKE SURE YOU CONNECT THE HEADER TO THE 3 PIN HEADER ON THE MOTHERBOARD OTHERWISE UNREPAIRABLE DAMAGE WILL OCCUR

LANCOOL II-2X (OPTIONAL)

THE SIDE DIFFUSED LEDS STRIP ADDS ONE ELEGANT RGB TOUCH TO THE BUILD
CONNECT ITS HEADER TO THE I/O PORT HEADER TO EASILY CONTROL THE LIGHTING THROUGH THE M AND C BUTTONS

LANCOOL II-4X (OPTIONAL)

EQUIP YOUR BUILD WITH THE 3.1 TYPE-C CABLE TO EFFECTIVELY CONNECT TO EXTERNAL DEVICES

AVAILABLE IN BLACK AND WHITE

BORN TO CATER TO BEGINNERS AND ENTHUSIASTS ALIKE

SPECIFICATIONS

MODEL NO.LANCOOL II – XLANCOOL II -W
ColorBLACKWHITE
Dimensions(D) 478 X (W) 229 X (H) 494
MotherboardE-ATX/ATX (width: under 280mm)/M-ATX/ITX
PSU210mm
MaterialsSteel
4.0mm tempered glass (both sides)
Fan SupportFront (multi-way fan/radiator bracket): 3 X 120mm or 2 X 140mm
Above PSU Chamber: 2 X 120mm
Top: 2 X 120/140mm
Rear: 1 X 120mm
RadiatorFront (multi-way fan/radiator bracket): 1 X 360/280/240mm
Top: 1 X 240mm (aligned to the left)
VGA Length384mm
CPU Clearance176mm
DriveBehind MB Tray: 2 X 2.5″ SSD
Hard Drive Cage: 3 X 3.5″ HDD/2.5″ SSD
Behind the Right-side Shroud Panel: 2 X 2.5″ SSD
Slot7
I/O Ports2 X LED Control Buttons (M & C)
1 X TRRS AUDIO
2 X USB 3.0
1 X USB 3.1 TYPEC (Optional)
Dust Filters1 x Top (magnetic), 1 x Front Panel (magnetic), 1 x Bottom (tray)
Incl Fans3 X 120mm (Front, Top, Rear)