• mesh-p-index
  • mesh-p-side45
  • mesh-p-front-fan
  • mesh-p-front
  • mesh-p-front-02
  • mesh-p-side-tempered-glass
  • mesh-p-side
  • mesh-p-right-side
  • mesh-p-air
  • mesh-p-low angle
  • mesh-p-top-IO
  • mesh-p-build
  • mesh-p-build02

LANCOOL II MESH performance

Born to push the limits

LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design and built-in PWM fans, ensuring bountiful airflow delivered to your components while the system runs at peak performance.

With the mesh front, LANCOOL II MESH making great airflow in the chasis, Packing three PWM fans, two front 140mm fans and one rear 120mm fan effectively cooling the component in user’s PC build and able to control by the botton on the I/O port. 9 drive mounting space and supports 384mm maximum GPU length and 176mm maximum hight clearence.Sollution for the cable management with double tempered glass to view the interior.

Born to push the limits

LANCOOL II MESH Performance features a mesh front panel and mesh bottom left shroud panel, honeycomb vent design and built-in PWM fans, ensuring bountiful airflow delivered to your components while the system runs at peak performance.

THE ULTIMATE CHASSIS FOR BEGINNERS AND ENTHUSIASTS ALIKE

EXQUISITE STEEL CRAFTSMANSHIP

Mesh intakes spanning the front panel guarantee sufficient airflow in and out of the system, allowing it to run at peak performance.

MORE ADVANCED COOLING SUPPORT

Optimized airflow is a result of the collaboration between the brand-new mesh design, additional exhaust vent holes, and three high-performance PWM cooling fans.

MESH FRONT PANEL

HONEYCOMB VENTS

MESH BOTTOM LEFT SHROUD PANEL

HIGH-PERFORMANCE BUILT-IN PWM FANS

2 x 140mm PWM intake fans pre-installed at the front and 1 x 120mm exhaust fan in the back of the PERFORMANCE EDITION produce ample airflow, keeping your system running at peak performance.

Front: 2 x 140mm PWM fans

140mm PWM fans

  • RPM range: 600~1200 RPM
  • Static pressure: 1.49mmH2O (maximum)
  • Airflow: 60.56 CFM (maximum)

Back: 1 x 120mm PWM fans

120mm PWM fans

  • RPM range: 600~1500 RPM
  • Static pressure: 1.78mmH2O (maximum)
  • Airflow: 54.6 CFM (maximum)

EXPERIENCE FAN CONTROL ON A WHOLE NEW LEVEL

The four-mode fan controller on the top front allows you to experience fan control on a whole new level. Select L for casual use like internet browsing, press H when you’re pushing your GPU(s) and CPU hard.

RPM duty

The included hub supports up to 6 PWM fans with either 3-PIN or 4-PIN headers.

Note! The hub supports fans with either 3-PIN or 4-PIN header. However, if you intend to synchronize and control fan speed and noise level for the added fans via the fan controller, the added fans should have 4-PIN PWM headers.

MODULAR PSU SHROUD COVER

The space between the top and bottom chamber now features two removable PSU shroud covers to house either 2 x 2.5” SSDs or can be removed to fit 2 x 120mm fans.

Compared to the former integrated design, the modular PSU shroud covers allow users to remove them for an unobstructed airflow between the top and bottom chamber.

When 2 fans are mounted, and the cover plates removed, ventilation efficiency is even better.

Even when 2 x SSDs are mounted, the vents on the PSU shroud covers guarantee good ventilation.

MULTI-WAY FAN/RADIATOR BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your needs.

55MM scenario

Closer to the motherboard for more direct cooling

110MM scenario

Closer to the front panel for thick radiators

HOW TO INSTALL THE MULTI-WAY FAN/RAD BRACKET

The multi-way bracket revolutionizes your notion of fan/radiator installation by offering 4 installation options to best fit your need.

ATTENTION!

Do not install a 140/280MM radiator in the inner side of the bracket otherwise irrepairable deformation might occur. The correct way to install is to mount fans first then place a radiator on top of the fans.

OPTIMIZED STORAGE CONFIGURATION

With the modular drive cage, side-mounted SSD bays, and additional SSD space on the modular PSU shroud cover, the LANCOOL II MESH is capable of holding up to 9 drives.

TOOLLESS SLIDING DRIVE CAGE

Slide the hard drive cage along its bottom track to the position that best fits your interior configuration.

DRIVE INSTALLATION GUIDE

SUPPORT UP TO 9 DRIVES

Modular drive cage: 3 x 3.5” HDDs/2.5” SSDs

Side-mounted SSD bays behind motherboard tray:
2 x 2.5” SSDs
Side-mounted SSD bays at the bottom right flip shroud:
2 x 2.5” SSDs

SHOP NOW ON NEWEGG

OPTIONAL KIT

LANCOOLII-1X
Vertical GPU Kit

LANCOOLII-3X
Hot-swappable Back Plate

LANCOOLII-4X 3.1 Type C Cable

GB-001X Anti-sag GPU Bracket

Note:
In the condition of using the included riser cable (PCIE3.0) of the vertical GPU kit with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.

1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)


4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.

SPECIFICATIONS

MODEL NAMELANCOOL II MESH
MODEL NO.LANCOOL II MESH Performance-X black
Dimensions(D) 478mm x (W) 229mm x (H) 494mm
MotherboardE-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU210mm
Colorblack
Materials

Steel

4.0mm tempered glass (both sides)

Fan SupportFront: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
RadiatorFront (multi-way fan/radiator bracket): 1 x 360/280/240mmTop: 1 x 240mm (aligned to the left)
VGA Length384mm
CPU Clearance176mm
Drive

Behind MB Tray: 2 x 2.5″ SSDBehind the right flip panel: 2 x 2.5”SSD

Hard Drive Cage: 3 x 3.5″ HDD/2.5″ SSD

Above PSU Chamber: 2 x 2.5″ SSD

Slot7
I/O Ports

1 x Fan speed control button1 x TRRS AUDIO

2 x USB 3.0

1 x USB 3.1 TYPEC

Dust Filters1 x Top (magnetic), 1 x Bottom (tray)
Incl Fans2 x 140mm PWM Fan (front)
Rated Speed:600 ±200 (30% Duty)-1200RPM ±10%
Air Flow:60.56CFM
Noise:25.8dB(A)1x 120mm PWM fan (rear)
Rated Speed:600 ±200 (30% Duty)-1500RPM ±10%
Air Flow:54.6CFM
Noise:26.1dB(A)