Lancool-215

Unobstructed Airflow

LANCOOL 215 features two pre-installed 200MM ARGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

Equiped with two 200mm ARGB fan and one 120 fan at the rear. The mesh panel in the front creates a great airflow without bring the dust in. Include top and bottom honeycomb filtered vents, wide fan/radiator combination support, and multiple cable management solutions for the DIY users to fit their configuration.

LANCOOL215_header

LANCOOL 215 features two pre-installed 200MM RGB fans and a 120MM fan, combining with mesh panels, honeycomb vents enable efficient ventilation.

 
SHOP NOW

Optimized thermal management

Mesh intakes spanning the front panel guarantee
sufficient airflow in and out of the system.

Optimized_thermal_management

Included Fans

Pre-installed fans ensure the case runs at peak performance.

1
2

Honeycomb vents

The honeycomb vent design at the top, rear, and above the PSU chamber guarantee an abundant airflow is delivered to the interior components, optimizing the thermal management.


Multi cooling
systems support

Supports a maximum of 7 fans and radiators
in various sizes and configurations. You make the call!

Front Panel
(interior)
3 x 120MM fans
2 x 140MM fans
280MM radiator with max 70MM thick
360MM radiator with max 70MM thick
Top Panel2 x 120MM fans
2 x 140MM fans
240MM radiator with max 55MM thick
280MM radiator with max 55MM thick
Bottom Panel
(on top of the PSU shroud)
2 x 120MM fans

Ultimate cooling system scenario

With two 200MM fans mounted outside of the frame,you still have enough room
 to front mount a 360 AIO radiator to benefit from the ultimate cooling scenario.
Don’t worry about the fan screws, they won’t interfere with the radiator.

Optimized thermal management

Move air stylishly with ARGB effects

Two 200MM fans are equipped with LED lights
which create a dazzling effect through the mesh panel.

215_LED_btn

Experience ARGB control via one button

The LED button located on the top controls 8 lighting modes
and 7 colors through a simple click.

215_highlightLED

Highlighted logo

The LIAN LI logo glows in sync with the fans

ARGB synchronization
with the motherboard

Pressing the LED button 3 seconds passes over the control of the LED lights
to the motherboard, and press the button 3 seconds again to regain control of the lights.

Effortless cable management

215_cable_management

Plenty of space for cable management

The 22MM thick space behind the motherboard ensures the cables fit in well.

215_fan_hub

Pre-installed fan hub

The included fan hub can provide extra power to 3 additional fans and 1 extra ARGB device.

215_Keep_the_cable_nice_and_neat

Keep the cable nice and neat

The rubber grommets around the motherboard and the cable tie points
at the back of the motherboard tray, with included Velcro straps,
simplify cable management.

STORAGE & MOTHERBOARD SUPPORT

Room for 4 Storage Drives

215_3.5HDD

Removable/adjustable cage supports
2 x 3.5” HDD or 1 x 3.5” HDD + 1 x 2.5” SSD

215_2.5SSD

2 x SSD support behind the motherboard

215_E-ATX_MB

E-ATX Motherboard Compatible

Fits motherboards with a maximum width of 280MM.

Simple Dust Management

The trendy mesh design at the front panel
provides filtration for dust coming from outside the chassis.
Moreover, the magnetic dust filter on the top
and the removable full-length dust tray
at the bottom protect the internal components
from dust accumulation without impeding the airflow.

Optional Accessories

215_1X

LANCOOL II-1X Vertical GPU Kit
Want to show your graphics card?
Lancool II-1x is a perfect fit for the LANCOOL 215.

215_2X

LANCOOL II-2X Side Diffused ARGB LEDs Strip
Not enough RGB?
Stick the LANCOOL II-2X at the top edge
of your PSU shroud.

SPECIFICATIONS

ModelLANCOOL 215
Dimensions(D) 462mm x (W) 215mm x (H) 482mm
MotherboardE-ATX(width: under 280mm)/ATX/M-ATX/ITX
PSU210mm
Colorblack
Materials

Steel

4.0mm tempered glass (both sides)

Incl Fans2 x 200MM 3-PIN 800 RPM ARGB fans (front)
1 X 120MM 3-PIN 1100 RPM Fans (rear)
Fan SupportFront: 2 x 140mm or 3 x 120mm
Top: 2 x 120mm or 2 x 140mm
Top of PSU chamber: 2 x 120mm
RadiatorFront: 1 x 280/360mm
Top: 1 x 240 / 280 mm
VGA Length370mm
CPU Clearance166mm
DriveBehind MB Tray: 2 x 2.5″ SSD
Hard Drive Cage: 2 x 3.5″ HDD or 1 x 2.5″ SSD
Slot7
I/O PortsPower button
Reset button
LED button for lighting mode control
1 x HD AUDIO
2 x USB 3.0
Dust Filters1 x Top (magnetic), 1 x Bottom (tray)