UNI FAN TL Wireless
- L-Wireless Sync supported (required for use)
- UNIFAN interlocking system for streamlined cable management
- Available in two versions: LED and LCD (mixable in a single cluster)
- Two light zones for an enhanced visual experience
- Full software control for fan speed, lighting effects, and LCD screen display via L-Connect 3
- Noise-optimized and performance-oriented fan.
- LCP (liquid crystal polymer) fan blades are used for tight tolerance.
The UNI FAN TL Wireless and TL LCD Wireless feature LIAN LI’s innovative wireless sync technology, utilizing a 2.4GHz wireless signal to control lighting effects and fan speed to further improve the PC building experience while delivering efficient cooling, dazzling lighting, and quiet operation.
MIX AND MATCH
1.6” LCD SCREEN
L-WIRELESS CONTROLLER
LCP FAN BLADES
DUAL ZONE LIGHTING EFFECT
ALUMINUM CENTER LOGO
MIX AND MATCH
1.6” LCD SCREEN
L-WIRELESS CONTROLLER
LCP FAN BLADES
DUAL ZONE LIGHTING EFFECT
ALUMINUM CENTER LOGO
AVAILABLE IN TWO VARIATIONS
TWO ORIENTATIONS / TWO COLORS / TWO SIZES
Black
White
Elevate the PC setup with the UNI FAN TL wireless LCD and non-LCD version. Two sizes: 120mm and 140mm fans are available in black and white, with options for standard and reverse blade configurations meeting all kinds of needs.
Note: The fan is slightly wider and thicker that standard 120mm fans at 120x124x28mm, and 140mm fans at 140x142x28mm. Please ensure your PC chassis is compatible.
Note: TL 140mm fans are only available in single packs and require a compatible controller, which must be purchased separately.
WIRELESS TRANSMISSION, EASY INSTALLATION
By adopting 2.4GHz wireless technology, the UNI FAN TL Wireless Series eliminates the need for traditional hub connections, significantly simplifying the installation process and enhancing user experience.
INNOVATIVE L-WIRELESS CONTROLLER
Instead of using the traditional connection method, the L-Wireless Sync Controller controls both lighting and fan speeds without connecting the cable to the controller.
The fans can be powered via a 4-PIN fan header on the motherboard or a SATA power cable.
For the LCD versions, a USB 2.0 9-PIN cable connection to the motherboard is required to set the LCD screen.
Connect to motherboard USB Type A Port.
Connect to the 9-PIN port on motherboard.
Note: To synchronize the fan speed with the motherboard, please use the second connection method and ensure that the PWM cable from the controller is connected to the motherboard for proper functionality.
The LCD and non-LCD versions use different receivers. For mixed clusters, use the LCD version receiver.
Reciever for LCD version
Reciever for non-LCD version
Each fan group requires connection to either a 12V PWM header or a 1-to-3 SATA splitter cable.
- UNI FAN TL Wireless: PWM cable powers the LED and motor.
- UNI FAN TL LCD Wireless: PWM cable powers the LED and motor; USB cable transmits LCD signals and provides LCD power.
Note: The controller includes the SATA power cable shown below.When using two or more fans, it is recommended to connect the SATA cable for stable power delivery.
The cable length can be shortened with the organizer on the receiver.
The transmission logic between the USB port and the LCD has been optimized, enabling the use of an additional USB splitter cable to the USB 2.0 or 3.0 port on the motherboard:
- USB splitter cable without SATA for additional power (e.g., LIAN LI USB 2.0 1-to-3 HUB): Supports up to 6 TL LCD wireless fans.
- USB splitter cable with SATA for additional power (e.g., LIAN LI Edge hub): Supports up to 9 TL LCD wireless fans.
- Furthermore, a single motherboard can support up to 20 UNI FAN TL LCD wireless fans.
LIAN LI Edge Hub
ONE CONTROLLER FOR ALL
The L-Wireless Controller supports UNI FAN TL Wireless, UNI FAN SL Wireless, Strimer Wireless, and more future products.
Note: UNI FAN TL Wireless Series’ receiver is compatible with the UNI FAN SL Wireless series.
The L-Wireless Controller can transmit signals to up to 10 channels.
Each group of wireless fans occupies one channel, while each Strimer Wireless uses an additional channel.
When all 10 channels are connected to the UNI FAN TL (non-LCD) wireless, the L-Wireless Controller can manage up to 40 fans at a time.
In the future, the L-Wireless Controller will also be compatible with more LIAN LI wireless devices. With this controller, you can create a stunning and streamlined LIAN LI ecosystem that combines beauty and simplicity!
PERSONALIZED REMIX, STYLE ON DISPLAY
UNI FAN TL Wireless and TL LCD wireless now can be mix-matched into a group, offering versatile configurations and empowering creativity.
L-Wireless controller configurations:
A group of 4 fans:
LCD x 2 + LED x 2
LCD x 3 + LED x 1
LED x 4
A group of 3 fans:
LCD x 3
PRACTICAL AND STYLISH LCD SCREEN
The UNI FAN TL LCD Wireless carries forward the legacy of the world’s first LCD-equipped fan. It features a 1.6” circular LCD screen with 60Hz refresh rate (upgraded from 30Hz) that integrates seamlessly with LIAN LI’s L-Connect 3 software, offering exceptional customizability.
● 1.6'' LCD
● 60HZ Refresh Rate
● 400x400 resolution
● 500 nits brightness
● sRGB 24-bit
● IPS TYPE DISPLAY
PERFORMANCE DETAIL AT A GLANCE
Monitor CPU and GPU temperature and load with new built-in animated hardware sensors displayed directly on the screen.For clusters of 3 LCD fans, multiple data points can be displayed simultaneously.
Compared to TL LCD V1 (wired version),
CPU usage while using sensor is significantly reduced.
CPU Load Test:
Number of TL LCD: 6
CPU Model: i7-12700F
Test System: Windows 10 22H2
UPLOAD YOUR STYLE
Achieve a completely personalized system style by uploading MP4/GIF/JPG/PNG files to customize the LCD screen.
UPLOAD YOUR STYLE
Achieve a completely personalized system style by uploading MP4/GIF/JPG/PNG files to customize the LCD screen.
COMBINATION OF PERFORMANCE AND AESTHETICS
The UNI FAN TL Wireless uses LCP material for fan blades, a copper center shaft, and FDB bearings with 9 tightly aligned blades (0.65mm gap), ensuring a striking look without compromising on performance.
The UNI FAN TL Wireless offers performance on par with the UNI FAN P28, the top performer in the UNI FAN lineup.
SOPHISTICATED CONTINUOUS RGB LIGHTING
Each UNI FAN TL Wireless series fan has 26 LEDs with a wide infinity mirror on the 2 sides of the fan frame that wraps around the edges of the anti-vibration pad.
SEAMLESS SOFTWARE
Able to set different fan speeds for each fan cluster to optimize different scenarios of use providing flexibility for radiator or case fan needs with L-Connect 3.
L-Connect 3 offers a variety of features, such as grouping, naming, and sorting fans for more intuitive management, providing diverse functionality and user-friendly design.
Note: If the PWM cable connects to the motherboard, switch the corresponding fan header to PWM mode in the BIOS. This step is unnecessary when using a PWM-SATA adapter.
PACKAGE CONTENT
Note: Only package with LCD is the LCD version.
12TLLCD1W1B
12TLLCD1W1W
12TLLCD1W3B
12TLLCD1W3W
12RTLLCD1W1B
12RTLLCD1W1W
12RTLLCD1W3B
12RTLLCD1W3W
12TL1W1B
12TL1W1W
12TL1WЗB
12TL1WЗW
12RTL1W1B
12RTL1W1W
12RTL1W3B
12RTL1W3W
14TLLCD1W1B
14TLLCD1W1W
14RTLLCD1W1B
14RTLLCD1W1W
14TL1W1B
14TL1W1W
14RTL1W1B
14RTL1W1W
SPECIFICATIONS
| PRODUCT NAME | UNI FAN TL120 LCD Wireless | |||
|---|---|---|---|---|
| MODEL | 12TLLCD1W3B | 12TLLCD1W3W | 12TLLCD1W1B | 12TLLCD1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 3 | 3 | 1 | 1 |
| CONTROLLER | Yes | No | ||
| CONNECTOR TYPE | 4-PIN PWM + 9-PIN USB x1, 3-12V PWM to SATA x1 | 4-PIN PWM + 9-PIN USB x1 | ||
| FAN DIMENSION | 120x124x28mm | |||
| FAN SPEED | 0,350~1900 RPM | |||
| MAX. AIR PRESSURE | 2.9 mmH2O (Maximum) | |||
| MAX. AIRFLOW | 62 CFM (Maximum) | |||
| ACOUSTIC NOISE | 27 dBA (Maximum) | |||
| INPUT POWER | 7.08W | |||
| MATERIAL | PBT&PA66 | |||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||
| PRODUCT NAME | UNI FAN TL 120 Wireless | |||
|---|---|---|---|---|
| MODEL | 12TL1W3B | 12TL1W3W | 12TL1W1B | 12TL1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 3 | 3 | 1 | 1 |
| CONTROLLER | Yes | No | ||
| CONNECTOR TYPE | 4-PIN PWM , 3-12V PWM to SATA x1 | 4-PIN PWM | ||
| FAN DIMENSION | 120x124x28mm | |||
| FAN SPEED | 0,200~2600 RPM | |||
| MAX. AIR PRESSURE | 3.97 mmH2O (Maximum) | |||
| MAX. AIRFLOW | 90.1 CFM (Maximum) | |||
| ACOUSTIC NOISE | 33 dBA (Maximum) | |||
| INPUT POWER | 5.8W | |||
| MATERIAL | PBT&PA66 | |||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||
| PRODUCT NAME | UNI FAN TL120 LCD Reverse Blade Wireless | |||
|---|---|---|---|---|
| MODEL | 12RTLLCD1W3B | 12RTLLCD1W3W | 12RTLLCD1W1B | 12RTLLCD1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 3 | 3 | 1 | 1 |
| CONTROLLER | Yes | No | ||
| CONNECTOR TYPE | 4-PIN PWM + 9-PIN USB x1, 3-12V PWM to SATA x1 | 4-PIN PWM + 9-PIN USB x1 | ||
| FAN DIMENSION | 120x124x28mm | |||
| FAN SPEED | 0,350~1900 RPM | |||
| MAX. AIR PRESSURE | 2.83 mmH2O (Maximum) | |||
| MAX. AIRFLOW | 54.3 CFM (Maximum) | |||
| ACOUSTIC NOISE | 31 dBA (Maximum) | |||
| INPUT POWER | 7.08W | |||
| MATERIAL | PBT&PA66 | |||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||
| PRODUCT NAME | UNI FAN TL 120 Reverse Blade Wireless | |||
|---|---|---|---|---|
| MODEL | 12RTL1W3B | 12RTL1W3W | 12RTL1W1B | 12RTL1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 3 | 3 | 1 | 1 |
| CONTROLLER | Yes | No | ||
| CONNECTOR TYPE | 4-PIN PWM x1, 3-12V PWM to SATA x1 | 4-PIN PWM | ||
| FAN DIMENSION | 120x124x28mm | |||
| FAN SPEED | 0,200~2300 RPM | |||
| MAX. AIR PRESSURE | 2.66 mmH2O (Maximum) | |||
| MAX. AIRFLOW | 83.4 CFM (Maximum) | |||
| ACOUSTIC NOISE | 34 dBA (Maximum) | |||
| INPUT POWER | 4.5W | |||
| MATERIAL | PBT&PA66 | |||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||
| PRODUCT NAME | UNI FAN TL140 LCD Wireless | UNI FAN TL140 Wireless | ||
|---|---|---|---|---|
| MODEL | 14TLLCD1W1B | 14TLLCD1W1W | 14TL1W1B | 14TL1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 1 | 1 | ||
| CONTROLLER | No | No | ||
| CONNECTOR TYPE | 4-PIN PWM + 9-PIN USB x1 | 4-PIN PWM | ||
| FAN DIMENSION | 120x124x28mm | 120x124x28mm | ||
| FAN SPEED | 0, 400~1600 RPM | 0,200~1800 RPM | ||
| MAX. AIR PRESSURE | 3.5 mmH2O (Maximum) | 2.34 mmH2O (Maximum) | ||
| MAX. AIRFLOW | 68.1 CFM (Maximum) | 103.9 CFM (Maximum) | ||
| ACOUSTIC NOISE | 28.5 dBA (Maximum) | 29 dBA (Maximum) | ||
| INPUT POWER | 6.72W | 4.6W | ||
| MATERIAL | PA66 PBT | PA66 LCP | ||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||
| PRODUCT NAME | UNI FAN TL WIRELESS LCD 140 REVERSE BLADE | UNI FAN TL WIRELESS 140 REVERSE BLADE | ||
|---|---|---|---|---|
| MODEL | 14RTLLCD1W1B | 14RTLLCD1W1W | 14RTL1W1B | 14RTL1W1W |
| COLOR | BLACK | WHITE | BLACK | WHITE |
| NUMBER OF FANS | 1 | 1 | ||
| CONTROLLER | No | No | ||
| CONNECTOR TYPE | 4-PIN PWM + 9-PIN USB x1 | 4-PIN PWM | ||
| FAN DIMENSION | 120x124x28mm | 120x124x28mm | ||
| FAN SPEED | 0,350~1600 RPM | 0.200~1800 RPM | ||
| MAX. AIR PRESSURE | 3.1 mmH2O (Maximum) | 2.27 mmH2O (Maximum) | ||
| MAX. AIRFLOW | 68.1 CFM (Maximum) | 103.9 CFM (Maximum) | ||
| ACOUSTIC NOISE | 29.4 dBA (Maximum) | 31 dBA (Maximum) | ||
| INPUT POWER | 6.72W | 4.6W | ||
| MATERIAL | PA66 PBT | PA66 LCP | ||
| BEARING TYPE | Fluid Dynamic Bearing (FDB) | |||
| OPERATE VOLTAGE | DC12V & 5V | |||
| WARRANTY | 3 years | |||