Q58
- Mini-ITX Aluminum Chassis
- Features swappable hinged glass and mesh panels
- Included PCIe 3.0 or PCIe 4.0 riser cable for vertically mounted GPU
- Supports SFX PSU and up to 160mm long ATX PSU
- Supports up to 325mm long radiator in certain circumstances
- Supports 4 storage drive mounting locations
- Cable management friendly with tie points and included LED/ fan hub
The ultimate 14.5L mini-ITX chassis choice
WHERE TO BUY
Aluminum Material
Two-Tone Design
Modular Design
Detail Oriented
Flexible Cooling
4 Drive Space
3 slots GPU Support
Cable Management
CRAFTMANSHIP IN BLACK AND WHITE
The mini-ITX chassis exquisite aluminum craftsmanship guarantees airflow while displaying the components.
BLACK |
- Black Coated Anodized Aluminum Mesh Panel
- Sandblasted Anodized Aluminum
- Brushed Aluminum
- Tinted Tempered Glass Panel
- Black Coated Fully Mesh Panel
WHITE |
- White Coated Aluminum Mesh Panel
- White Coated Aluminum
- White USB port
- Transparent Tempered Glass Panel / White Silkscreen
- White Extend Cable
- Silver Screw
- Mesh Panel
SWAPPABLE HINGE PANELS
The dual side split hinged panels feature two 3.0mm thick tempered glass panels and two 1.0mm fine mesh panels that are swappable.
The Q58 can accommodate both the airflow and the look of your choice.
MODULAR DESIGN FOR SFX/ATX POWER SUPPLY
Compatible for both SFX and ATX PSU, the Q58 comes with an additional bracket to transform from SFX PSU mode to ATX PSU mode.
ATX PSU Mode
SFX PSU Mode
DETAILS MAKE PERFECTION
BUILD LIKE A PRO – AVOID GLASS DAMAGES
The hinged glass panel features a curve hole at the rear, which allows opening of the panel without removing the thumbscrew, and helps avoid any possible damage caused to the glass by preventing it from leaning on the table.
EFFORTLESS CONNECTION – INCLUDED LED/ FAN HUB
Flip the LIAN LI logo plate at the rear to access the LED/fan hub that supports 3 PWM fan headers and 3 LED headers ( 5V 3 Pin ARGB) without dealing with cable clutter.
Note: Connect the hub to the motherboard to sync and control the devices connected to the hub via the motherboard software.
ADVANCE KIT – TOOLLESS HOT SWAP SSD TRAY
Exclusively design for the Q58, a toolless hot swap SSD tray is located at the front top of the case. Simply open the top and front panel to quickly remove or replace the SSD without unplugging any cables.
FLEXIBLE COOLING SUPPORT
In SFX PSU mode, the Q58 has room for a 280mm AIO. Depending on the mounting configuration employed, the actual supported length of the AIO varies.
1. Radiator directly mount on the top fan bracket
2. Radiator mount below the fan
3. Radiator mount below the fan + Removed front SSD tray
In ATX PSU mode, the Q58 has room for a 120mm AIO.
UNCOMPROMISED STORAGE SPACE
The ingenious use of the room in the Q58 allows for 4 storage drive mounting locations. Drives support includes 4×2.5” SSDs, or 3×2.5” SSDs and 1×3.5” HDD.
1.Toolless hot swap SSD tray
2.SSD / HDD expansion rack on fan bracket
3.SSD mount behind SFX PSU bracket
4.Bottom bracket for SSD or 120mm fan
COMPACT YET SPACIOUS GPU SUPPORT WITH RISER CABLE
The Q58 implements a PCIe 3.0 or PCIe 4.0 riser cable to vertically mount a GPU up to 3 slots thick and 320mm long.
Note: When using a PCIe 4.0 ready motherboard, GPU and CPU in the PCIe 3.0 version of the Q58, please access the motherboard BIOS and set the PCIe status from Auto Mode or Gen 4 Mode to Gen 3 Mode prior to mounting it in the case.
Note: When installing a nearly 320mm long and thick GPU, the space between the GPU and the inner side of IO might be tight, thus the installation might need more time and some fit-in-angle adjustment.
USB 3.1 TYPE C PORT
The Q58 I/O ports are located at the front panel and feature a Type C port with efficient transmission speeds.
COMPREHENSIVE CABLE MANAGEMENT
Several Velcro straps and multiple cable tie-down points are provided to tidy up the cables and the bottom fan bracket helps to snuggle the cables into the Q58.
STOP THE DUST
Two magnetic dust filters are attached at the bottom of the chassis and the mesh panel to prevents dust from entering the case.
NEED MORE RGB?
OPTIONAL ACCESSORY – SIDE DIFFUSED LED STRIP
The LED strips can be mounted at the top and bottom side of the Q58 to further personalize the case.
Note: Connect the strip to the included hub and connect the hub to the motherboard to control the lighting of the strip.
NEED MORE AIR?
OPTIONAL ACCESSORY– MESH SIDE PANEL
This accessory kit includes two hinged 1.0mm mesh panels to increasing the airflow in the Q58.
DOWNLOADS
SPECIFICATIONS
MODEL NAME | Q58 | |||
---|---|---|---|---|
MODEL NO. | Q58X3 BLACK | Q58X4 BLACK | Q58W3 WHITE | Q58W4 WHITE |
COLOR | Black | White | ||
RISER CABLE GENERATION | PCIe3.0 | PCIe4.0 | PCIe3.0 | PCIe4.0 |
DIMENSIONS | (D) 342mm x (W) 170mm x (H) 250mm | |||
MATERIALS | Aluminum Exterior SPCC Steel Interior 3.0mm tinted tempered glass side panels | |||
MOTHERBOARD SUPPORT | Mini-ITX | |||
FAN SUPPORT | SFX PSU Mode: Top:2x 120mm or 2x 140mm Bottom:1x 120mm ATX PSU Mode: Top:1x 120mm or 1x 140mm Bottom:1x 120mm | |||
RADIATOR SUPPORT | SFX PSU Mode: Top:1x 240mm or 280mm (Max length 315mm, or max 325mm if remove front SSD tray) Bottom:1x 120mm ATX PSU Mode: Top:1x 120mm Bottom:1x 120mm | |||
PSU SUPPORT | SFX/SFX-L/ATX (max length 160mm) | |||
GPU LENGTH CLEARANCE | Max 320mm | |||
CPU COOLER CLEARANCE | Max 67mm | |||
DRIVE SUPPORT | SFX PSU Mode: 4x 2.5” SSD or 3x 2.5” SSD + 1x 3.5” HDD ATX PSU Mode: 2x 2.5” SSD | |||
EXPANSION SLOT | 3 | |||
I/O PORTS | 1x USB 3.0, 1x USB 3.1 TYPE-C, 1x HD AUDIO | |||
DUST FILTER | 2 x bottom magnetic | |||
WARRANTY | 1 year |
SPECIFICATIONS
PRODUCT NAME | |||
---|---|---|---|
LIAN LI Q58 | |||
MODEL | |||
Q58X3 | Q58X4 | Q58W3 | Q58W4 |
COLOR | |||
Black | White | ||
RISER CABLE GENERATION | |||
PCIe3.0 | PCIe4.0 | PCIe3.0 | PCIe4.0 |
DIMENSIONS | |||
(D) 342mm x (W) 170mm x (H) 250mm | |||
MATERIALS | |||
Aluminum Exterior SPCC Steel Interior 3.0mm tinted tempered glass side panels | |||
MOTHERBOARD SUPPORT | |||
Mini-ITX | |||
FAN SUPPORT | |||
SFX PSU Mode: Top:2x 120mm or 2x 140mm Bottom:1x 120mm ATX PSU Mode: Top:1x 120mm or 1x 140mm Bottom:1x 120mm | |||
RADIATOR SUPPORT | |||
SFX PSU Mode: Top:1x 240mm or 280mm (Max length 315mm, or max 325mm if remove front SSD tray) Bottom:1x 120mm ATX PSU Mode: Top:1x 120mm Bottom:1x 120mm | |||
PSU SUPPORT | |||
SFX/SFX-L/ATX (max length 160mm) | |||
GPU LENGTH CLEARANCE | |||
Max 320mm | |||
CPU COOLER CLEARANCE | |||
Max 67mm | |||
DRIVE SUPPORT | |||
SFX PSU Mode: 4x 2.5” SSD or 3x 2.5” SSD + 1x 3.5” HDD ATX PSU Mode: 2x 2.5” SSD | |||
EXPANSION SLOT | |||
3 | |||
I/O PORTS | |||
1x USB 3.0, 1x USB 3.1 TYPE-C, 1x HD AUDIO | |||
DUST FILTER | |||
2 x bottom magnetic | |||
WARRANTY | |||
1 year |