Strimer Wireless

Back
Didn't find your solution? Contact Tech Support Team.
Strimer Wireless 24-Pin – Incompatibility with Side-Mounted Motherboards

The current generation of 24-pin Strimer Wireless does not support reversible ligh strip orientation.
Since side-mounted and vertical-mounted boards are flipped, the light strips may not be visible when installed.
Starting mid-June, production will include a reversible clip for improved compatibility.
➡ Contact us via for a free replacement clip.

Wireless Sync List Shows “Unknown Device” and Won’t Revert
  1. Confirm software version is on the latest version. 
  2. Follow the steps: 
    1. With PC on, unplug the power/receiver module from the fan group with issue.
    2. Find LIAN LI icon on Windows bottom right corner, right clicks to shutdown service
    3. Wait 10 seconds.
    4. Unplug the L-Wireless controller. 
    5. Plug the power/receiver module back to the fan group. 
    6. Plug the L-Wireless controller back. 
    7. Right click LIAN LI icon again to restart service.
Devices Missing from Wireless Sync Setup List (Disappeared from UI)
  1. Confirm L-Connect version is on the latest version. 
  2. Check if Wireless fan’s power is supplied from included SATA-PWM splitter or PWM 12V Hub (such as Edge Hub or Edge Gold’s Hub).
  3. Close the L-Connect 3 service, wait 10 sec, unplug the wireless dongle, and plug it into the rear I/O USB-A (rear USB port recommended). Restart the service afterward.
  4. If the devices still don’t appear, then contact us via “form” with this result.
Wireless Device Lighting Turns Abnormal After Boot or During Idle
  1. Check that the power source is sufficient—confirm SATA is connected or new receiver is properly installed as per the manual.
  2. Make sure to update L-Connect 3 to the latest version.
  3. If the problem is reoccurring, then contact us via “form” with this result.
I’m using LIAN LI Wireless devices, and every time I start the system, L-Connect 3 takes a long time to open.
  1. By default, the software delays the Service startup by 3 seconds after boot. You can change this to 0 seconds in the Settings menu.
  2. Additionally, the wireless transmitter initialization has an extra 5-second delay, which can make the startup feel even longer.
  3. We recommend enabling Fast Startup in Windows and setting the shutdown behavior to Sleep instead of full power-off for a faster startup experience.
I’m using the LIAN LI wireless device and have confirmed that all wireless dongles are properly connected. I’ve also updated to the latest software, but I still don’t see the wireless sync setup option.
  1. Go to windows service
  2. Find Windows Management Instrumentation 
  3. Make sure that is running, and set it to auto-run
Faulty Wireless Dongle – Signs and Symptoms
  1. Binding/unbinding and lightbulb click works, but lighting signals are received inconsistently or slowly by some fans – likely a faulty antenna, then contact us via “form” with this result 
  2. L-Connect 3 takes a very long time to launch or hangs until restart – indicates USB instability, then contact us via “form” with this result. 

Lighting effects like Quick Sync or Merge show jittering/glitching – signal timing errors from a faulty wireless controller, then contact us via “form” with this result.