Hydroshift LCD AIO
● The LCD screen display shows flickering,ghosting.
● The screen on my AIO is stuck on the LIAN LI logo.
● My device loses the USB connection intermittently.
● For the TL version, the screen stay off while turning on the pc.
● The sensor is not being correctly detected.
● Can the Hydroshift LCD 360R fan ARGB and speed sync with the motherboard?
● Pump is not functioning, causing high CPU temperature.
The LCD screen display shows flickering,ghosting.
Please refer to the troubleshooting guide.
The screen on my AIO is stuck on the LIAN LI logo.
Please ensure the following steps are completed:
- Install both Microsoft Visual C++ Redistributable packages (X86 / X64). Restart your PC after installation.
- Verify that all cables are correctly connected.
- It is recommended not to connect the USB cable to the motherboard through a splitter. If necessary, use a USB hub that features the appropriate chip.
My device loses the USB connection intermittently.
- Update your BIOS to the latest version
- Update to the latest chipset driver corresponding to your system.
Quick links: Intel Support Download center (Guide)/ AMD Support Download Driver (Guide) - Try switching to a different USB port.
- Update to the latest version of L-Connect 3. Be sure to fully uninstall the previous version before installing the update.
For the TL version, the screen stay off while turning on the pc.
Please refer to the connection guide:
- Ensure the TL and screen combo cable is not connected to Port #1 on the controller.
- If connected to an Edge PSU, avoid connecting the USB cable to the port closest to the motherboard connector port.
The sensor is not being correctly detected.
This issue can be resolved by updating to the latest version of L-Connect 3.. Please follow the guide to fully uninstall the previous version before installing the new one.
Can the Hydroshift LCD 360R fan ARGB and speed sync with the motherboard?
No, the Hydroshift LCD 360R fan ARGB and speed can only be controlled with L-Connect 3.
Pump is not functioning, causing high CPU temperature.
To ensure the proper functioning of the shift AIO pump, users should connect the 12V PWM Pump cable to the CPU FAN or AIO pump header in the motherboard. Then, enter the BIOS and set the connected header to PWM mode. Avoid connecting it to the CPU OPT.
