|
|
|
|
|
Creative Thermal Solution
PC-A77 is using "Thermal Tunnel" solution, the two 120mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation . To get extra cooling to particular area, simply adjust the HDD cage to allow cold air to cool the hot spot .
|
|
|
|
|
|
|
|
|
|
There are two 120mm intake fan on PC-A77, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack.
|
|
|
|
|
|
|
|
|
|
The case front fitted with vented 5.25” bezels, allow the cold air to enter the chassis, there are air filter on the bezel to stop dust entering the chassis.
|
|
|
|
|
|
|
|
|
|
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis.
|
|
|
|
|
|
|
|
|
|
The HDD cage also fitted a 120mm exhaust fan to draw the hot air out, to keep the HDD cold, and remove the hot air from the system.
|
|
|
|
|
|
|
|
|
|
There are alot of M/B using heat pipe solution, PC-A77 can 100% support them, for extra cooling, there are openning on the M/B tray, allow air to cool the rear of the M/B.
.
|
|
|
|
|
|
|
|
|
|
There is a smart way to control the fan speed. PC-A77 can automatically adjust the fan speed as temperature difference. When there is not hot inside the chassis, the fan will be set in low speed mode, to make the system silent, and to extend fan's life cycle. The Fan speed will adjusted automatically by temperature difference, fan speed from 1020RPM to 1500RPM.
|
|
|
|
|
|
|
|
|
|
Power supply unit located at the lower part of the chassis, and it can get the cool air from the bottom of the chassis. Ideal for keep power supply in lower temperature to keep in best output performance, also keep the components cold to extend the life cycle.
|
|
|
|
|
|
|
|
|
|
There are opening for water tubes on rear panel. Ideal for user who would like to fit liquid cooling system into PC-A77.
|
|
|
| <Prev |
|
|
|
|
|
|
|
Next> |
