O11DXL-1 VERTICAL GPU BRACKET KIT PCI-e 3.0
Vertical Graphics Card Holder for O11Dynamic XL
ALLOWS YOU TO VERTICALLY DISPLAY GRAPHICS CARDS
5 SLOTS OFFER BUILDERS MORE INSTALLATION OPTIONS
Adjust The Cable To Best Showcase Your Graphics Card
3 Slot GPU → install at ①
(Bend the riser cable as needed, keep the folding point round)
2 Slot GPU → install at ① ② ④
INCLUDED PCI-E RISER CABLE
The 200mm PCI-E Riser Cable
Allows You To Mount A PCI-E 16X Card
- PIC-E 2.0, PCI-E 3.0
- High Bandwidth
- Safety/Flatness
- Data Rates: Up To 8 Gbps
Note:
In the condition of using the included riser cable (PCIE3.0) with a PCIE 4.0 motherboard and a PCIE 4.0 GPU, please follow bellow steps to set up your BIOS to make it compatible.
1.Make sure that your motherboard BIOS is the latest version. If not, recommend to update to the latest version.
2. Install your GPU directly to the motherboard and start.
3. Enter your BIOS, set the PCIE slot from “Auto” to “Gen 3”. (Example photo as below, for more please read the manual of your motherboard)
4. Save your settings and turn off the system
5. Install the PCIE 3.0 riser cable to the motherboard and the GPU, the system would be able to work.
INSTALLATION GUIDE
SPECIFICATIONS
| Model | O11DXL-1 |
| Material | STEEL |
| Expansion Slot | 5 |
| PCI-e cable lenght | 200mm |